
27 Seal Strip Tape for Door Mat Edge
Geometric Design and Cross-Section Analysis:Upper Ramp Width: 25 mm (Creates a sloped transition line on the outer edges of mat basins that is safe, reduces tripping risk to zero, and cushions steps).Total Profile Base Width: 46 mm (Thanks to a wide mounting flange that contacts the floor, it adheres to the ground with maximum strength and eliminates the possibility of slipping).Inner Profile (Basin) Height: 8 mm (Provides precise fit to thicker aluminum frame structures, heavy-duty carpets, or high-pile mat thicknesses, gripping edge perimeters flawlessly).Channel, Geometry and Internal Support Structure: The product features a 27 mm wide angled flexible ramp geometry on the left side, a 46 mm wide flat mounting base extending to the right, and an 8 mm internal bed in the center that supports the perpendicular surface of mat profiles. The special internal support (bridge) geometry beneath the ramp of this model prevents the ramp from collapsing when stepped on despite increased basin height, and provides high load-bearing capacity.⚙️ Functional Role in the System:Safe Transition and Trip Barrier: At entrances with heavy foot traffic, it reduces the height difference created by the 8 mm mat thickness to zero through the 27 mm ramp structure. It absolutely prevents shoes, heels, strollers, or wheelchairs from catching on the mat edge.Heavy-Duty Mat Protection and Framing: Wraps the outer edges of thick aluminum-bodied or densely textured mats like a protective armor. It prevents the mat edges from spreading, crushing, and sliding outward, preserving the integrity of the floor system.Edge Isolation and Perimeter Cleanliness: Creates an outer barrier that prevents dust, mud, snow water, and dirt from seeping under the mat base. It ensures that contaminants tracked in from outside remain within the mat boundaries, maximizing perimeter cleanliness.Target Sector and Application Area:Aluminum mat manufacturers, corporate and industrial building entrance mat system producers, floor covering and installation companies, commercial space, hotel, hospital, and shopping mall architectural application workshops.Raw Material and Tolerance Identity:PVC and TPE Extrusion: The 46 mm lower base that contacts the ground and holds the mat, along with the internal support bridge, has optimum hardness to resist tearing under constant compression and crushing loads. The 27 mm angled ramp surface that comes into direct contact with steps is manufactured with high-abrasion resistance, non-slip properties, and co-extrusion (Co-ex) technology that maintains "memory" stability and does not lose its shape after heavy pedestrian traffic.Climate and Thermal Stability (Temperature Values):CNR Seal- PVC Series: Operates within standard seasonal temperatures between -20°C and +60°C. It is a highly economical and long-lasting heavy-duty mat edge solution for interior entrances and protected building doors.CNR Seal- TPE Series: Demonstrates superior thermal stability in the most extreme climate conditions between -40°C and +80°C. It does not melt, sag, loosen, or crack when exposed directly outdoors at main building entrances, becoming scorching hot under the sun, or subjected to freezing conditions; it does not harden under winter frost and snow loads, maintaining non-slip and safety performance.Packaging and Production Length:Standard Wrapping: The standard packaging/wrapping quantity established by our factory for this heavy-duty mat edge and protection model is x meters.Flexible Solution: To prevent waste based on mat frame measurements, custom length winding or roll wrapping is carried out according to customer requirements and project specifications.Customer-Specific (Custom) Flexibilities:Different color options (Black, Gray, Anthracite, Brown, etc.) that will match the entrance concept, aluminum frame, or floor color, creating visual harmony.Custom length cutting capability tailored to your project that simplifies corner cutting work at installation sites and saves time.
View Details