Entrance Mat Seals and Profiles
CNR SEAL offers sealing profiles and connecting components for aluminium entrance mat systems used in hotels, shopping centres, offices and other commercial buildings. Our profiles are designed to support secure fitting, help create a neat finish and meet the requirements of different entrance mat configurations. Product suitability depends on the system design, dimensions and application requirements.

25mm Threshold Seal Strip
Geometric Design and Section Analysis:Top Head Width: 5 mm (Sits perfectly on the sealing surface of the horizontal locking and joint profiles of guillotine glass panels).Insertion Tab (Root) Width: 3 mm (Locks into the narrow cross-section inner tab channels of aluminum locking profiles through tight insertion logic).Total Profile Height: 5 mm (Depth sufficient to flawlessly close the micro-isolation gap at the locking point where two moving glass panels overlap).Channel and Geometry Structure: The product features a 3 mm circular locking root (locking tab) at the bottom that provides mechanical retention to the profile, a 5 mm wide flat head structure directly above that balances the supporting body, and a total compact working height of 5 mm. It is designed with minimum tolerances to prevent sagging at glass joint lines.Functional Role in the System:Locking Point Air and Water Sealing: Provides sealing along the horizontal line where motorized vertically-moving guillotine glass panels interlock when closed. Definitively prevents air infiltration and water leakage through locking joints during strong winds and heavy rainfall striking the façade.Acoustic Dampening and Whistle Suppression: Counters micro-vibrations caused by wind on the panels, preventing aluminum profiles from striking one another. Its aerodynamic structure completely eliminates whistling noise that wind can create in narrow passage areas.Dust and Dirt Barrier: Creates a complete isolation wall between interior and exterior environments, preventing dust, pollen, and contaminants from penetrating into the horizontal locking gaps.Target Sector and Application Area:Motorized vertically-moving guillotine glass system manufacturers, winter garden and pergola lower enclosure installation companies, architectural aluminum joinery factories, and heated guillotine system producers.Raw Material and Tolerance Profile:PVC and TPE Extrusion: The 3 mm lower locking root inserted into the aluminum locking channel features optimal hardness to prevent glass panels from slipping during continuous up-and-down movement. The 5 mm upper head section that continuously presses against and slides on the opposite panel surface is manufactured using high-wear-resistant, flexible co-extrusion (Co-ex) technology with the ability to recover its original form after compression and long-term shape memory stability.Climatic and Thermal Stability (Temperature Values):CNR Seal - PVC Series: Operates within standard seasonal temperatures between -20°C and +60°C. Provides a highly economical and long-lasting locking isolation solution for standard guillotine projects requiring interior comfort and basic insulation.CNR Seal - TPE Series: Demonstrates superior thermal stability under the most extreme climatic conditions between -40°C and +80°C. Does not melt, stick, dry out, or loosen inside locking profiles that are directly adjacent to glass panels and become excessively heated by direct sunlight and greenhouse effect; maintains elasticity during winter freezing snow loads and frost conditions, preventing glass movement restriction.Packaging and Production Length:Standard Packaging: The standard packaging/wrapping quantity for this guillotine locking and isolation model as established by our factory is x meters.Flexible Solution: To prevent material waste by manufacturers and installation teams based on their horizontal panel widths, customized reel or spool winding is performed according to customer requirements and profile lengths.Customer-Specific (Custom) Flexibilities:Color options that match the aluminum locking profiles and design concept (Anthracite Gray RAL 7016, Black, White, Cream, etc.) to create visual unity.Project-specific custom cutting capability that eliminates cutting labor at the installation site.
View Details
27 Seal Strip Tape for Door Mat Edge
Geometric Design and Cross-Section Analysis:Upper Ramp Width: 25 mm (Creates a sloped transition line on the outer edges of mat basins that is safe, reduces tripping risk to zero, and cushions steps).Total Profile Base Width: 46 mm (Thanks to a wide mounting flange that contacts the floor, it adheres to the ground with maximum strength and eliminates the possibility of slipping).Inner Profile (Basin) Height: 8 mm (Provides precise fit to thicker aluminum frame structures, heavy-duty carpets, or high-pile mat thicknesses, gripping edge perimeters flawlessly).Channel, Geometry and Internal Support Structure: The product features a 27 mm wide angled flexible ramp geometry on the left side, a 46 mm wide flat mounting base extending to the right, and an 8 mm internal bed in the center that supports the perpendicular surface of mat profiles. The special internal support (bridge) geometry beneath the ramp of this model prevents the ramp from collapsing when stepped on despite increased basin height, and provides high load-bearing capacity.⚙️ Functional Role in the System:Safe Transition and Trip Barrier: At entrances with heavy foot traffic, it reduces the height difference created by the 8 mm mat thickness to zero through the 27 mm ramp structure. It absolutely prevents shoes, heels, strollers, or wheelchairs from catching on the mat edge.Heavy-Duty Mat Protection and Framing: Wraps the outer edges of thick aluminum-bodied or densely textured mats like a protective armor. It prevents the mat edges from spreading, crushing, and sliding outward, preserving the integrity of the floor system.Edge Isolation and Perimeter Cleanliness: Creates an outer barrier that prevents dust, mud, snow water, and dirt from seeping under the mat base. It ensures that contaminants tracked in from outside remain within the mat boundaries, maximizing perimeter cleanliness.Target Sector and Application Area:Aluminum mat manufacturers, corporate and industrial building entrance mat system producers, floor covering and installation companies, commercial space, hotel, hospital, and shopping mall architectural application workshops.Raw Material and Tolerance Identity:PVC and TPE Extrusion: The 46 mm lower base that contacts the ground and holds the mat, along with the internal support bridge, has optimum hardness to resist tearing under constant compression and crushing loads. The 27 mm angled ramp surface that comes into direct contact with steps is manufactured with high-abrasion resistance, non-slip properties, and co-extrusion (Co-ex) technology that maintains "memory" stability and does not lose its shape after heavy pedestrian traffic.Climate and Thermal Stability (Temperature Values):CNR Seal- PVC Series: Operates within standard seasonal temperatures between -20°C and +60°C. It is a highly economical and long-lasting heavy-duty mat edge solution for interior entrances and protected building doors.CNR Seal- TPE Series: Demonstrates superior thermal stability in the most extreme climate conditions between -40°C and +80°C. It does not melt, sag, loosen, or crack when exposed directly outdoors at main building entrances, becoming scorching hot under the sun, or subjected to freezing conditions; it does not harden under winter frost and snow loads, maintaining non-slip and safety performance.Packaging and Production Length:Standard Wrapping: The standard packaging/wrapping quantity established by our factory for this heavy-duty mat edge and protection model is x meters.Flexible Solution: To prevent waste based on mat frame measurements, custom length winding or roll wrapping is carried out according to customer requirements and project specifications.Customer-Specific (Custom) Flexibilities:Different color options (Black, Gray, Anthracite, Brown, etc.) that will match the entrance concept, aluminum frame, or floor color, creating visual harmony.Custom length cutting capability tailored to your project that simplifies corner cutting work at installation sites and saves time.
View DetailsTailored Production and Solutions
Need custom dimensions, color or cross-section on our existing products? Planning a special profile for a different application? Our engineering team designs custom molds and recommends formulations based on your project — send us your request and let's build the right solution together.
Precision Manufacturing
We manufacture to the tolerances demanded by your technical drawings, samples and application requirements — using PVC, TPE, TPV and other technical raw materials at high quality standards.
Turnkey From Design to Mold
From your technical drawing or sample, we plan and manage the entire flow — profile design, mold development, sample approval and serial production — from a single center.
Transparent Production Flow
From the first evaluation of your request through production and shipment, we track every stage on a planned schedule and provide timely updates at each step — delivering reliable project management.
