CNR-FSB-100107

Inflatable Seal Strip

Contact

Description

Geometric Design and Cross-Section Analysis:

  • Total Strip Width: 70 mm (A symmetrical rubbing strip profile designed to protect the outer side tube hulls of inflatable boats, Zodiacs, and RIB-type semi-rigid marine vessels).

  • Profile Geometric Structure: The product features a smooth flat base on the bottom surface that maintains full-angle contact with the boat fabric. On the upper surface, a shock-absorbing fully solid and flat protective spine (pressure bridge) rises along the center axis. On the right and left wing edges, symmetrical stepped micro-grip lines extend to optimize friction.

Functional Role in the System:

  • Perfect Rubbing Strip Effect with Solid Spine: The solid thick spine structure in the center directly absorbs hard impacts, crushing, and friction blows that occur when the boat approaches the hull frame, dock, or other marine vessels. Unlike the previous channeled model, this center structure is completely filled (solid), providing maximum surface strength under heavy service conditions.

  • Stepped Dampening and Splash Control: The stepped grip lines on the right and left wings break up linear wind and wave loads. During navigation, it functions as a light splash barrier that prevents water striking the boat's edge from rising upward and directs water outward.

  • Seam Reinforcement and Hull Protection: By being pulled over the longitudinal seams and welds of the boat tubes, it absolutely prevents the opening of seams under high air pressure. Due to its balanced and symmetrical design, it provides complete conformance to the boat's flexing oscillations at high speeds.

Target Industry and Application Field:

Inflatable boat and Zodiac manufacturers, RIB (semi-rigid) boat producers, water sports and marine rescue equipment manufacturing facilities, boat maintenance and repair workshops, and military/industrial marine vessel contract manufacturing plants.

Raw Material and Tolerance Identity:

  • Marine-Grade Polymer Technology: The product is manufactured with a special marine engineering compound that provides tear resistance against saltwater corrosion, chemicals in seawater, and continuous mechanical pressure. It features co-extrusion (Co-ex) technology with high "memory" stability that forms perfect chemical bonds with industrial adhesives applied to the hull, ensuring the solid center block does not compress after impact and retains its original shape.

Climatic and Thermal Stability (Heat Values):

  • CNR Seal- Marine Standard Series: Provides stability at standard water and air temperatures between -20°C and +60°C. It is a highly economical and long-lasting strip solution for vessels used in lake, river, and standard marine enclosure applications.

  • CNR Seal- Extreme Marine Series: Offers superior thermal stability under the most severe marine and air conditions between -40°C and +80°C. On boat surfaces that become extremely hot like ovens from direct UV rays in open sea during summer, it does not melt, sag in the spine structure, or dry out; in winter, it maintains its flexible protective structure without hardening under freezing snow loads and frost conditions.

Packaging and Production Footage:

  • Standard Packaging: For this solid spine rubbing strip model, the standard packaging/wrapping quantity established by our factory is x meters in single spool form.

  • Flexible Solution: In accordance with boat lengths and the objective of reducing waste ratios in production lines to zero, custom spool or bobbin wrappings are performed according to customer requirements.

Customer-Specific (Contract) Flexibilities:

  • Production capability with different color options that will fully match the concept of your boat fabric and corporate design (Military Green, Black, Grey, White, Navy Blue, etc.).

  • Production option in different wall thicknesses or Shore A hardness degrees customized according to your boat hull's corrugation design and adhesive tape width.

Similar Products

Inflatable Tube Sealing Strip
CNR-FSB-100101

Inflatable Tube Sealing Strip

Geometric Design and Cross-Section Analysis:Total Strip Width: 89.5 mm (Features a wide-angle protective line that covers the external main hull sides of inflatable boats, Zodiacs, and marine vessels).Profile Wall Thickness / Height: 2 mm (When bonded to the boat hull, it features a smooth thin cross-section depth that does not add extra weight, create indentations, or compromise the hydrodynamic structure).Channel and Geometric Structure: The product features a completely smooth upper and lower surface with a wide, flat strip (belt) geometry. It is manufactured with high tolerance precision to enable flawless adhesion to the boat's curved tube surfaces (balloons) using cold or hot vulcanization bonding techniques and to prevent folding at curves.Functional Role in the System:External Hull Impact Armor and Protection: It absorbs the friction impacts that inflatable boats will experience during docking, mooring to piers, or contact with other vessels. It provides complete protection to the boat's main PVC or Hypalon fabric against abrasion and tearing.Joint Reinforcement and Sealing: By being pulled over the longitudinal seam lines (stitching and welding joints) of the boat tubes, it creates an additional sealing layer. It definitively prevents seam separation under high pressure and strengthens the watertight seal line.Hydrodynamic Flexibility: Due to its wide structure, it supports water breaking outward from the boat edge during wave impacts (spray barrier function). It provides complete adaptation to the hull's flexing movements during operation without compromising body rigidity.Target Sector and Application Area:Inflatable boat and Zodiac manufacturers, maritime and water sports equipment production facilities, boat maintenance-repair and overhaul workshops, and military/industrial marine vessel contract manufacturing plants.Raw Material and Tolerance Identity:Marine Conditions Compatible Polymer Technology: The product is manufactured with a specialized engineering compound that provides tear resistance against saltwater corrosion, chemicals in seawater, and continuous flexing. It features co-extrusion (Co-ex) technology that forms perfect chemical bonds with industrial adhesives applied to the hull, possesses high tensile strength, and exhibits memory stability without set deformation after stretching.Climatic and Thermal Stability (Temperature Values):CNR Seal - Marine Standard Series: Demonstrates stability in standard water and air temperatures between -20°C and +60°C. It is a highly economical and long-lasting belt solution for vehicles used in lake, river, and standard marine sealing applications.CNR Seal - Extreme Marine Series: Offers superior thermal stability in the harshest marine and atmospheric conditions between -40°C and +80°C. It does not melt, soften, crack, or dry out on boat surfaces that heat up like an oven from direct UV exposure in open sea during summer; it retains its flexible structure without stiffening in freezing cold and under saltwater in winter.Packaging and Production Length:Standard Packaging: The standard packaging/wrapping quantity established by our factory for this boat belt strip model is xx meters on a single reel.Flexible Solution: In accordance with boat lengths and the objective of reducing waste ratios to zero on production lines, custom reel or bobbin wrapping is performed according to customer requirements.Customer-Specific (Custom) Flexibilities:Custom production option with different color selections (Black, Military Green, Grey, White, Navy Blue, etc.) that fully match your boat fabric concept and corporate design.Custom production option in different wall thicknesses or Shore A hardness grades according to your boat hull's curve design and bonding strip width requirements.

View Details
Inflatable Seal Strip
CNR-FSB-100102

Inflatable Seal Strip

Geometric Design and Cross-Section Analysis:Total Strip Width: 117 mm (Features a heavy-duty protection line covering the external side hull balloons of inflatable boats, Zodiacs, and marine vessels at a much wider angle).Profile Base Thickness: 2 mm (Provides flexibility that does not add extra weight when bonded to the hull and does not compromise the boat's aerodynamic and hydrodynamic structure).Channel and Geometry Structure: The product features a smooth flat base on the underside that sits perfectly on the boat tube surface, and on the upper surface a vertically corrugated (toothed) geometry composed of micro-square cleats arranged at regular intervals. It is manufactured to zero tolerance to ensure flawless adhesion to the boat's curved tube surfaces (balloons) using cold or hot vulcanization bonding techniques.Functional Role in the System:Maximum Impact Armor and Friction Protection: Withstands severe friction impacts that inflatable boats experience during docking, mooring, or contact with other vessels. The corrugated square cleats on the upper surface progressively dampen impacts and provide maximum protection of the boat's main PVC/Hypalon fabric against abrasion and tearing.Anti-Slip Surface and Seam Reinforcement: The corrugated structure on the upper section creates an anti-slip surface when stepped on during boarding and disembarking, enhancing safety. Stretches over the longitudinal joint lines (welds and seam edges) of the boat tubes, definitively preventing seam separation under high pressure.Spray Barrier and Hydrodynamic Flexibility: Due to its massive 117 mm width and corrugated surface, it supports water deflection outward from the boat edge during wave impact (spray barrier function). Provides full compliance with the boat's flex movements during operation without compromising hull rigidity.Target Sector and Application Area:Inflatable boat and Zodiac manufacturers, rafting and water sports equipment production facilities, boat maintenance and repair workshops, and military/industrial marine vehicle contract manufacturing plants.Raw Material and Tolerance Identity:Marine-Grade Polymer Technology: The product is manufactured with a specialized marine engineering compound that provides high tear resistance against saltwater corrosion, marine chemicals, and continuous flexing. It features co-extrusion (Co-ex) technology that forms perfect chemical bonds with industrial adhesives applied to the hull, possesses high tensile strength, and exhibits "memory" stability without elongation set after stretching.Climatic and Thermal Stability (Temperature Values):CNR Seal- Marine Standard Series: Demonstrates stability in standard water and air temperatures between -20°C and +60°C. Provides a highly economical and long-lasting strip solution for vehicles used in lake, river, and standard marine sealing applications.CNR Seal- Extreme Marine Series: Offers superior thermal stability in the harshest marine and atmospheric conditions between -40°C and +80°C. On boat surfaces that become oven-like when exposed directly to UV rays in open water during summer, it does not melt, soften, crack, or dry out; in winter under freezing snow loads and sub-zero temperatures, it does not harden but retains its flexible properties.Packaging and Production Yardage:Standard Packaging: The standard packaging/wrapping quantity established by our factory for this corrugated strip boat guard model is xx meters in a single reel form.Flexible Solution: Custom reel or spool wrapping is performed according to customer requirements to match boat lengths and reduce waste rates on production lines to zero.Customer-Specific (Contract) Flexibilities:Production capability with different color options (Military Green, Black, Grey, White, Navy Blue, etc.) that fully match your boat fabric concept and corporate design.Production option in different wall thicknesses or Shore A hardness degrees as contract manufacturing according to your boat hull curve design and adhesive strip width.

View Details
Inflatable Boat Seal
CNR-FSB-100103

Inflatable Boat Seal

Geometric Design and Cross-Section Analysis:Total Strip Width: 106 mm (Provides optimal protection coverage wrapping the external main hull balloons of inflatable boats, Zodiacs and all mobile marine vessels at full angle against impacts).Profile Base Thickness: 2 mm (When bonded to the hull, possesses hydrodynamic flexibility that does not compromise the boat's overall weight balance and prevents pocketing on curved tube surfaces).Channel and Geometry Structure: The product features a smooth flat base on the lower surface that bonds completely to boat fabric, and on the upper surface features 4 shock-absorbing channels arranged at regular intervals with crescent-shaped (bombe) hollow chambers. It is designed to zero tolerance for flawless locking onto the boat's curved outer surfaces using cold or hot vulcanization bonding techniques.Functional Role in the System:Shock-Absorbing Maximum Impact and Compression Armor: Absorbs macro impact loads that inflatable boats will experience during moments of approaching the dock, mooring in harbor or contact with other vessels in rough waves. The crescent chambers on the upper surface collapse inward upon impact, dampening impact force like a shock absorber and protecting the boat's main fabric from rupture risk.Spray Barrier and Water Deflection: Due to its 106 mm width and outward-projecting circular channel lines, it breaks wave water striking the boat's edge outward during navigation. Functions as an effective spray barrier preventing water from entering the boat interior.Joint Area Protection and Hull Rigidity: Drawn over the longitudinal joint lines (welds and seam joints) of boat tubes, it absolutely prevents opening of joint areas under high air pressure. Provides complete adaptation to the rigid and aggressive hull flexure fluctuations in demanding marine movements.Target Sector and Application Area:Inflatable boat and Zodiac manufacturers, rafting and marine water sports equipment production facilities, boat maintenance-repair and overhaul workshops, and military/industrial marine vessel contract manufacturing plants.Raw Material and Tolerance Identity:Marine-Grade Polymer Technology: The product is manufactured with a special marine engineering compound offering tear resistance against saltwater corrosion, chemicals in seawater and continuous mechanical pressure. It features co-extrusion (Co-ex) technology with high elasticity "memory" stability that forms perfect chemical bonding with industrial adhesives applied to the hull and allows circular channels to rapidly return to original form after impact.Climatic and Thermal Stability (Temperature Values):CNR Seal- Marine Standard Series: Demonstrates stability in standard water and air temperatures between -20°C and +60°C. An economical and long-lasting strip solution for vehicles used in lake, river and standard marine closures.CNR Seal- Extreme Marine Series: Offers superior thermal stability in the most severe marine and air conditions between -40°C and +80°C. Does not melt, sag in chambers or dry out on boat surfaces that heat like an oven from direct UV exposure in summer open sea conditions; does not harden in freezing snow loads and freezing cold in winter, maintaining shock-dampening performance.Packaging and Production Footage:Standard Wrapping: For this channeled profile strip model, the standard packaging/wrapping quantity established by our factory is x meters in single spool form.Flexible Solution: Custom spool or bobbin wrappings are performed according to customer requirements, conforming to boat lengths and production line targets for reducing scrap rates to zero.Customer-Specific (Contract) Flexibilities:Production capability with different color options fully matching your boat fabric concept and corporate design (Military Green, Black, Grey, White, Navy Blue, etc.).Production option as contract work in different wall thicknesses or Shore A hardness degrees according to your hull surface curve design and adhesive strip width.

View Details
Inflatable Seal Strip
CNR-FSB-100104

Inflatable Seal Strip

Geometric Design and Cross-Section Analysis:Strip Total Width: 112.22 mm (Features a heavy-duty protection line covering the external side hull balloons of inflatable boats, zodiacs and marine vessels at a very wide angle).Total Profile Height: 6.2 mm (Includes stepped claw structure on the surface and central channel, offering extra material thickness to absorb impact energy on the boat).Channel and Geometry Structure: The product features a smooth flat base on the undersurface that adheres fully to the boat fabric. On the upper surface, micro-square cleats (treads) are arranged symmetrically along the right and left wings. At the exact center axis of the profile runs a V-type deep water channeling and flexibility channel that curves inward.Functional Role in the System:Dual-Action Impact Armor and Flexibility: Withstands harsh friction and crushing impacts when inflatable boats dock, moor or make contact with other vessels. The treaded square cleats on the upper surface progressively dampen impacts, while the deep central channel acts as a flex joint preventing the strip from separating from the boat surface under vertical wind and wave loads.Non-Slip Surface and Centralized Water Drainage: The treaded structure on the upper section creates a safe anti-slip surface when stepped upon during boarding and disembarkation. The longitudinal central channel allows water striking the hull to flow along the line without dispersing sideways, functioning as an effective spray barrier.Seam Protection and Hull Rigidity: Stretched over the main joint lines of boat tubes (welds and seam joints), it absolutely prevents joint separation under high air pressure. Its wide structure and central channel provide complete compliance with the hard flexing movements of the boat in rough sea conditions.Target Sector and Application Area:Inflatable boat and zodiac manufacturers, rafting and professional water sports equipment production facilities, boat maintenance and repair workshops, and military/industrial marine vessel contract manufacturing plants.Raw Material and Tolerance Identity:Marine-Grade Polymer Technology: The product is manufactured with special marine engineering compound offering tear resistance against salt water corrosion, marine water chemicals and continuous mechanical pressure. It features co-extrusion (Co-ex) technology with excellent chemical bonding to industrial adhesives applied to the hull, high tensile strength and "memory" stability that does not crease after flexing.Climatic and Thermal Stability (Temperature Values):CNR Seal - Marine Standard Series: Maintains stability at standard water and air temperatures between -20°C and +60°C. A highly economical and long-lasting strip solution for vehicles used in lake, river and standard marine closures.CNR Seal - Extreme Marine Series: Offers superior thermal stability in the harshest marine and atmospheric conditions between -40°C and +80°C. Does not melt, wear on the cleats or dry out on boat surfaces that become oven-hot from direct UV exposure in summer open ocean; maintains its flexible structure without hardening under freezing snow loads and sub-zero winter cold.Packaging and Production Footage:Standard Winding: For this treaded and central-channel boat strip model, our factory's established standard packaging/winding quantity is a single reel bobbin of x meters.Flexible Solution: Custom spool or bobbin windings are performed according to customer requirements, adapted to boat lengths and production line waste reduction targets.Custom (Contract) Flexibilities:Production capability with different color options that provide complete compliance to your boat fabric concept and corporate design (Military Green, Black, Gray, White, Navy Blue etc.).Production option with different wall thicknesses or Shore A hardness grades as a custom solution according to your boat hull crimp design and adhesive tape width.

View Details
Inflatable Seal Strip
CNR-FSB-100105

Inflatable Seal Strip

Geometric Design and Cross-Section Analysis:Total Strip Width: 68.7 mm (Features a compact rubbing strake body that protects the side lines of inflatable boats, RIB (semi-rigid) hulls, and marine vessels from a dynamic perspective).Total Profile Height: 9.45 mm (Includes a thick half-moon wave breaker buffer on the surface and flexible scraper hook structure, offering extra wall thickness to withstand impact energy upon the boat).Channel and Geometry Structure: The product features a smooth flat base on the lower surface that fully adheres to the boat's curved inflatable fabric. On the upper surface, it incorporates a functional hybrid geometry; on the right side sits a shock-absorbing solid circular bombe (buffer) line, while on the left side features a flexibly curved outward-facing hook (scraper/flag) structure that redirects water flow.Functional Role in the System:Advanced Spray Barrier and Water Scraping: The curved hook geometry located at the left end breaks wave water rising and striking the boat's chine during navigation, deflecting it outward and downward. Thanks to the angled scraping mechanism, it serves as a perfect spray barrier preventing water from entering the boat.Cushioned Side Protection and Rubbing Strake Effect: The thick circular bombe structure on the right side withstands hard friction and crushing impacts when the boat approaches a pier, dock, or other marine vessels. By absorbing impact force along the entire line, it definitively prevents bursting or wear of the main hull PVC or Hypalon fabric.Seam Protection and Flexibility Compactness: When stretched over the critical joint lines of boat tubes, it prevents seam opening under high air pressure. Due to its compact width and asymmetric design, it provides complete conformity to the boat's flexing and wave undulations during aggressive maneuvers.Target Sector and Application Field:Inflatable boat and Zodiac manufacturers, RIB (semi-rigid) hull producers, water sports and rescue equipment manufacturing facilities, boat maintenance and repair workshops, and military/industrial marine vessel contract manufacturing plants.Raw Material and Tolerance Identity:Marine-Grade Polymer Technology: The product is manufactured using a specialized marine engineering compound that provides tear resistance against saltwater corrosion, chemicals in seawater, and continuous mechanical stress. It features co-extrusion (Co-ex) technology with high "memory" stability that achieves perfect chemical bonding with industrial adhesives applied to the body, preventing the scraper hook from fluttering in wind and allowing the shock buffer to rapidly return to its original form.Climatic and Thermal Stability (Temperature Values):CNR Seal- Marine Standard Series: Demonstrates stability in standard water and air temperatures between -20°C and +60°C. It is a highly economical and long-lasting strip solution for vehicles used in lake, river, and standard marine closures.CNR Seal- Extreme Marine Series: Provides superior thermal stability under the harshest marine and atmospheric conditions between -40°C and +80°C. On boat surfaces heated like an oven from direct UV rays in open ocean summers, it does not melt, sag at the hook structure, or dry out; in winter under freezing snow loads and sub-zero cold, it does not become brittle and maintains its flexible properties.Packaging and Production Footage:Standard Wrapping: For this scraper and buffer-equipped rubbing strake strip model, the standard packaging/wrapping quantity established by our factory is x meters in single reel form.Flexible Solution: Custom reel or spool wrapping is performed according to customer requirements to suit boat lengths and achieve zero scrap rates on production lines.Customer-Specific (Custom) Flexibilities:Production capability with different color options (Military Green, Black, Grey, White, Navy Blue, etc.) that fully match the boat fabric concept and your corporate design.Option for custom production at different wall thicknesses or Shore A hardness degrees according to your boat hull contour design and adhesive tape width specifications.

View Details
Inflatable Bead Seal
CNR-FSB-100106

Inflatable Bead Seal

Geometric Design and Cross-Section Analysis:Total Strip Width: 70 mm (Features a symmetrical rubbing profile designed to protect the outer side tube bodies of inflatable boats, Zodiacs, and RIB-type semi-rigid marine vessels).Profile Geometry Structure: The product features a smooth flat base on its underside that maintains full contact angle with the boat fabric. On its upper surface, a thick impact-absorbing protective spine rises along the center axis. At the center of this spine is a square-shaped reinforcement channel, while the right and left wing edges feature stepped micro-claw lines.Functional Role in the System:Maximum Rubbing Effect with Central Spine: When the boat approaches a dock, pier, or other marine vessels, the rigid impacts and crushing blows generated are directly absorbed by the 70 mm thick central spine structure. By distributing the impact force along the entire strip width, it reliably prevents wear and rupture of the main hull fabric.Impact Damping through Channel and Step Combination: The embedded square channel at the center of the spine increases the wick's flexing tolerance when vertical loads are applied, thereby breaking the impact force. The stepped claw lines on the right and left wings optimize the friction surface, functioning as a light splash barrier that deflects wave water outward.Seam Reinforcement and Hull Protection: Applied over the longitudinal seams and welds of boat tubes, it prevents seam separation under high air pressure. Thanks to its symmetrical and balanced design, it provides complete compatibility with the boat's high-speed flexing waves.Target Sector and Application Area:Inflatable boat and Zodiac manufacturers, RIB (semi-rigid) boat producers, water sports and marine rescue equipment manufacturing facilities, boat maintenance and repair workshops, and military/industrial marine vessel contract manufacturing plants.Raw Material and Tolerance Identity:Marine-Grade Polymer Technology: The product is manufactured with a special marine engineering compound that provides tear resistance against saltwater corrosion, chemicals in seawater, and continuous mechanical stress. It features co-extrusion (Co-ex) technology with high "memory" stability that forms perfect chemical bonds with industrial adhesives applied to the hull and allows the central spine to quickly return to its original form after impact.Climatic and Thermal Stability (Temperature Values):CNR Seal- Marine Standard Series: Demonstrates stability at standard water and air temperatures between -20°C and +60°C. A highly economical and long-lasting strip solution for vehicles used in lake, river, and standard marine sealing applications.CNR Seal- Extreme Marine Series: Provides superior thermal stability under the most severe marine and atmospheric conditions between -40°C and +80°C. On boat surfaces that become scorching hot in summer when directly exposed to UV rays in open waters, it does not melt, sag at the spine structure, or dry out; in winter under freezing snow loads and sub-zero cold, it does not harden, maintaining its flexible protective structure.Packaging and Production Footage:Standard Wrapping: For this central spine-type rubbing strip model, the standard packaging/wrapping quantity established by our facility is x meters in single spool format.Flexible Solution: To suit boat lengths and achieve zero waste ratios on production lines, custom spool or bobbin wrappings are performed according to customer requirements.Customer-Specific (Contract) Flexibilities:Production capability with different color options that perfectly match your boat fabric concept and corporate design (Military Green, Black, Gray, White, Navy Blue, etc.).Custom production option in different wall thicknesses or Shore A hardness grades according to your boat hull's curve design and adhesive tape width.

View Details
Inflatable Boat Cord
CNR-FSB-100108

Inflatable Boat Cord

Geometric Design and Section Analysis:Strip Total Width: 107 mm (A wide-range asymmetric rubbing strip profile designed to protect the side tube hulls of inflatable boats, Zodiacs, and RIB-type semi-rigid marine vessels from wind and wave water).Profile Geometric Structure: The product features a smooth flat base on the lower surface that sits flush at full angle to the boat fabric. On the upper surface, it incorporates an asymmetric geometry providing high hydrodynamic performance; on the left axis there is a flexible hook (wiper) structure curving outward, while along the descending line to the right there is a hollow angled support bridge (ramp) that provides resistance and elasticity to the profile.Functional Role in the System:Advanced Spray Barrier and Water Shedding: The curved hook geometry located at the left end breaks wave water rising up the boat's side during navigation outward and downward. Thanks to the angled shedding mechanism, it serves as a perfect spray barrier that prevents water from entering the boat even at high speeds.Angled Support Bridge and Rubbing Strip Effect: The hollow angled support ramp on the right side withstands hard lateral impact and crushing loads that occur when the boat docks at piers, wharves, or other marine vessels. Due to its hollow structure, it flexes upon impact to absorb force and definitively prevents wear on the main hull's PVC or Hypalon fabric.Seam Reinforcement and Hull Protection: It is pulled over the lengthwise seams and welds of boat tubes to definitively prevent seam separation under high air pressure. Due to its aerodynamic asymmetric design, it provides complete conformity to the boat's wave undulations and flexing movements at high speeds.Target Sector and Application Field:Inflatable boat and Zodiac manufacturers, RIB (semi-rigid) boat producers, water sports, coast guard and marine rescue equipment manufacturing facilities, boat maintenance and repair workshops, and military/industrial marine vessel contract manufacturing plants.Raw Material and Tolerance Identity:Marine-Grade Polymer Technology: The product is manufactured with a special marine engineering compound that provides tear resistance against saltwater corrosion, chemicals in seawater, and continuous mechanical pressures. It features co-extrusion (Co-ex) technology with high "memory" stability that forms a perfect chemical bond with industrial adhesives applied to the hull, prevents the wiper hook from folding backward at high speed due to wind, and allows the support ramp to quickly return to its original form after impact.Climate and Thermal Stability (Temperature Values):CNR Seal - Marine Standard Series: Demonstrates stability in standard water and air temperatures between -20°C and +60°C. It is a highly economical and long-lasting strip solution for vessels used in lake, river, and standard marine sealing applications.CNR Seal - Extreme Marine Series: Provides superior thermal stability in the harshest marine and air conditions between -40°C and +80°C. On boat surfaces that are directly exposed to UV rays in the open sea in summer and become as hot as an oven, it does not melt, sag in the hook structure, or dry out; in winter with freezing snow load and frost conditions, it does not harden but maintains flexible protection and shedding capability.Packaging and Production Footage:Standard Winding: For this rubbing strip model with wiper and angled support bridge, the standard packaging/winding quantity established by our factory is x meters on a single reel.Flexible Solution: In accordance with boat lengths and the objective to reduce waste ratios on production lines to zero, special reel or bobbin windings are performed according to customer requirements.Customer-Specific (Contract) Flexibilities:Manufacturing capability with different color options that will provide full compatibility with your boat fabric concept and corporate design (Military Green, Black, Gray, White, Navy Blue, etc.).Production option in different wall thicknesses or Shore A hardness degrees as custom work according to your boat hull curvature design and adhesive tape width.

View Details
Inflatable Seal Strip
CNR-FSB-100109

Inflatable Seal Strip

Geometric Design and Cross-Section Analysis:Stripe Total Width: 200 mm (Features a mega series protection line covering the external side main hull balloons of inflatable boats, Zodiacs, boat bottoms and marine vessels at maximum angle).Profile Base Thickness: 2 mm (Despite its massive width, it does not add extra weight when applied to the hull, with flexibility that will not compromise the boat's aerodynamic and hydrodynamic structure).Channel and Geometry Structure: The product features a smooth flat base on its lower surface that bonds completely to boat fabric, and a vertical ribbed (toothed) geometry on its upper surface consisting of micro square cleats arranged at specific intervals along the entire line. It is manufactured with zero tolerance to enable flawless adhesion to the boat's curved tube surfaces and keel line sections using cold or hot vulcanization bonding techniques.Functional Role in the System:Maximum Area Coverage Impact and Abrasion Armor: Thanks to its 200 mm mega width, it completely wraps the boat's side edges and especially the boat's bottom keel line (chine) which is most exposed to friction. When entering shallow waters, approaching shorelines and on rocky terrain, it provides complete protection of the boat's main fabric against wear, tearing and bursting.Non-Slip Base and Maximum Joint Area Reinforcement: The upper ribbed structure creates a safe non-slip surface when stepped on in boat interior or edge walkways. Due to its wide structure, it completely covers the multiple joint lines of boat tubes (welds and seams) and absolutely prevents joint openings under high air pressure.Spray Barrier and Hydrodynamic Flexibility: The wide and ribbed surface structure breaks the direction of water during wave impacts, functioning as an effective spray barrier preventing water from entering the boat. It provides complete adaptation to the boat's undulation movements in marine conditions without compromising hull rigidity.Target Sector and Application Area:Large-scale inflatable boat and Zodiac manufacturers, rafting and professional river/sea sports equipment manufacturing facilities, military and industrial marine vessel contract manufacturing plants and boat maintenance-repair/overhaul workshops.Raw Material and Tolerance Identity:Marine Conditions Compatible Polymer Technology: The product is manufactured with a special marine engineering compound that provides mega-width tear resistance against saltwater corrosion, marine water chemicals and continuous stretching. It features co-extrusion (Co-ex) technology with "memory" stability that forms perfect chemical bonding with industrial adhesives applied to the hull, showing no sagging or waviness after stretching.Climatic and Thermal Stability (Temperature Values):CNR Seal- Marine Standard Series: Demonstrates stability in standard water and air temperatures between -20°C and +60°C. An economical and long-lasting stripe solution for vehicles used in lake, river and standard marine sealing applications.CNR Seal- Extreme Marine Series: Provides superior thermal stability in the harshest marine and weather conditions between -40°C and +80°C. It does not melt, soften, crack or dry on boat surfaces that heat up like an oven when directly exposed to UV rays in open sea during summer; in winter it maintains its flexible structure without hardening under freezing snow loads and extreme cold.Packaging and Production Length:Standard Wrapping: For this 200 mm mega ribbed stripe boat band model, the standard packaging/wrapping quantity set by our factory is x meters in single spool form.Flexible Solution: Custom spool or bobbin wrappings are performed according to customer demand, suitable for boat lengths and the objective of reducing waste rates on production lines to zero.Customer-Specific (Contract) Flexibilities:Production capability with different color options that will provide complete compatibility with your boat fabric concept and corporate design (Military Green, Black, Grey, White, Navy Blue, etc.).Custom production option in different wall thicknesses or Shore A hardness grades according to your boat hull curvature design and adhesive band width.

View Details
Custom Request

Tailored Production and Solutions

Need custom dimensions, color or cross-section on our existing products? Planning a special profile for a different application? Our engineering team designs custom molds and recommends formulations based on your project — send us your request and let's build the right solution together.

Submit Custom Request

Precision Manufacturing

We manufacture to the tolerances demanded by your technical drawings, samples and application requirements — using PVC, TPE, TPV and other technical raw materials at high quality standards.

Turnkey From Design to Mold

From your technical drawing or sample, we plan and manage the entire flow — profile design, mold development, sample approval and serial production — from a single center.

Transparent Production Flow

From the first evaluation of your request through production and shipment, we track every stage on a planned schedule and provide timely updates at each step — delivering reliable project management.