CNR-OKA-010203

Automatic Shutter Wide Bottom Base Seal Strip

Roll Length50 MT
Contact

Description

  • Geometric Design and Cross-Section Analysis:

    • Base Width: 15 mm (Sits firmly in the standard T-groove channel bed on the lower base profile).

    • Total Height: 20 mm (Features wide circular cross-section for closing ground gaps and high compression tolerance).

    • Channel and Geometric Structure: The product has a dual-leg T-base structure with a fully round, wide air channel (large balloon/tube) sealing geometry at the top. The outer surface of the round balloon is equipped with micro-ribbed lines that prevent slipping on ground contact and provide graded sealing.

  • Functional Role in the System:

    • High Compression Tolerance and Shock-Absorber Function: The large circular tube structure dampens the vertical pressure applied by the motor in heavy shutter systems with a wide compression area. It prevents the metal base from striking the ground with hard impact and absorbs motor closing load.

    • Wide-Area Base Sealing: Completely closes deep gaps in uneven, rough, or damaged floors with its 20 mm wide height and flexible structure. Reliably prevents water, wind, dust, leaves, and pests from seeping in from below.

    • Wear and Protection Barrier: Creates a complete cushioning zone for the base profile due to its wide circular form, preventing deformation of aluminum or steel base.

  • Target Sector and Application Area:

    • Automatic spiral shutter and industrial blind manufacturers, sectional door assemblers using wide cross-section base profiles, factory and warehouse garage door manufacturers.

  • Raw Material and Tolerance Identity:

    • PVC and TPE Extrusion: The lower T-base legs that pass into the aluminum channel are of optimal hardness to prevent displacement under load. The wide upper circular balloon section in contact with the ground possesses high "memory" stability (permanent deformation resistance) for continuous compression and recovery cycles.

  • Climate and Thermal Stability (Temperature Values):

    • CNR Seal - PVC Series: -20°C to +60°C standard seasonal temperature range. The most economical and long-lasting base insulation solution for indoor spaces or commercial shop projects in standard climate conditions.

    • CNR Seal - TPE Series: Provides superior thermal stability in the most demanding exterior and ground conditions between -40°C to +80°C. Does not crack or break when in contact with freezing snow and ice on the ground in winter; in summer, it does not melt, stick, or lose form over hot concrete or hot asphalt surfaces.

  • Packaging and Production Length:

    • Standard Packaging: For this wide base seal model, our factory's standard packaging length is 50 meters.

    • Flexible Solution: To minimize waste ratios in projects, reel or coil winding is performed in custom lengths as requested based on customer requirements and order volume.

  • Customer-Specific (Custom) Flexibility:

    • Black, Anthracite Gray, or Gray color options to suit shutter profiles and ground concepts.

    • Custom length cutting capability that eliminates cutting labor at assembly lines.

Similar Products

Automatic Shutter Brushed Insertion Strip
CNR-OKF-010101
200 MT

Automatic Shutter Brushed Insertion Strip

Geometric Design and Cross-Section Analysis:Base Width: 11 mm (Provides stabilization by fitting flush into the vertical profile channel).Total Height: 22 mm (Its deep structure tolerates pallet deflection).Functional Structure: The product features a combined design incorporating a flexible sealing lip (fin) that applies pressure to the shutter pallet on the rear surface, and a triple brush bed (indicated by red lines) on the side that allows for hair/brush integration.Functional Role in the System:Friction and Wear Prevention: Prevents metal-to-metal contact as shutter pallets move up and down within the vertical guide (rail) profile.Sound and Whistle Barrier: Prevents shutter pallets from rattling and making noise as they sway within the rail in strong winds. Eliminates wind whistling sound.Dual-Layer Insulation: Both the plastic sealing lip and integrated brush structure work together to prevent dust, leaves, wind, and rainwater from seeping in through two stages.Target Sector and Application Area:Automatic coil shutter manufacturers, sectional door producers, industrial warehouse door installers, and factories producing aluminum/steel shutter systems.Raw Material and Tolerance Identity:PVC and TPE Extrusion: The base and body section passing through the vertical channel is optimized for easy installation; the upper lip section contacting the pallet features flexibility to prevent scratching (Co-ex production technology).Precise mold tolerances allow smooth sliding into aluminum guide rails without jamming.Climatic and Thermal Stability:PVC Alternative: Operates between -20°C and +60°C. Offers highly economical insulation for standard store and shop shutters.TPE Alternative: Between -40°C and +80°C, provides complete resistance to harsh exterior façade conditions and sun-heated metal profiles. Does not harden or crack during freezing; does not sag in summer heat.Packaging and Production Footage:Standard Spool: The standard packaging/spooling quantity established by our factory for this model is 200 meters.Flexible Solution: To minimize scrap rates on automatic shutter manufacturers' and large projects' assembly lines, custom metrages (sizes) on spools or reels are provided according to customer request and order quantity.Custom (Custom Order) Flexibilities:Color options in Anthracite Grey, Black, White, or Grey according to shutter profile color.Custom size cutting advantage according to the customer's vertical shutter heights to eliminate manufacturing scrap.

View Details
Flat Side Guide Seal for Automatic Roller Shutters
CNR-OKD-010102
200 MT

Flat Side Guide Seal for Automatic Roller Shutters

Geometric Design and Cross-Section Analysis:Channel Structure: The profile features a standard clip design that facilitates installation within the vertical rail (stile). On the body, it incorporates a specially-clipped groove (channel) fully compatible with hair brush integration to enhance insulation performance.This channel structure in the design ensures the hair brush base sits tightly in the groove, preventing it from becoming dislodged or sliding downward during shutter movement.Functional Role in the System:Hair Brush Compatibility and Hybrid Insulation: The hair brush inserted through the special channel structure combines with the plastic seal body to create a hybrid barrier. The hair brush dampens coarse dust, leaves, and wind on the palette, while the seal body prevents water and air penetration.Friction and Wear Prevention: During the vertical up-and-down movement of shutter palettes, it definitively prevents scratching, deformation, and paint wear caused by friction against the metal rail edges.Noise and Wind Stabilization: Through the combined operation of the hair brush and flexible seal structure, it completely prevents the palettes from striking side-to-side within the rail channel under wind load, causing noise (rattling). The system operates silently.Target Sector and Application Area:Automatic coiled shutter manufacturers, modern blind and shutter installers using brush channel rail stile systems, sectional garage and industrial warehouse door factories.Raw Material and Tolerance Identity:PVC and TPE Extrusion: The base structure resting on the stile bed and hair brush channel clips have a hardness that will not deform during installation and will hold the brush securely. The flexible lip section working with the palette is wear-resistant and smooth.Climate and Thermal Stability (Temperature Values):CNR Seal - PVC Series: Operates in standard seasonal temperatures between -20°C and +60°C. It is the most economical alternative for interior spaces, passage shops, or projects with standard climate conditions.CNR Seal - TPE Series: Offers superior thermal stability in extreme external facade conditions between -40°C and +80°C. In summer, it does not loosen or sag on metal stiles scorched by direct sunlight; in freezing winter cold, it retains elasticity, preventing the hair brush channel from cracking and breaking.Packaging and Production Length:Standard Coil: The standard packaging/coil quantity set by our factory for this model is 200 meters.Flexible Solution: To minimize scrap rates for manufacturing companies, coiling is performed in custom lengths according to customer requirements and order volume.Customer-Specific (Contract) Flexibility:Color options in Anthracite Grey, Black, White, or Grey for visual consistency with shutter profile colors.Capability for special size cutting to save time on assembly lines.

View Details
Automatic Shutter Steel Base Seal
CNR-OKA-010202
100 MT

Automatic Shutter Steel Base Seal

Geometric Design and Cross-Section Analysis:Base Width: 20 mm (Due to the wide and angled base structure, it sits firmly and durably on steel base profile substrates).Total Height: 15 mm (Low profile height supports perfect ground interlocking during the closing of steel doors and spiral shutters).Channel and Geometric Structure: The product features a special asymmetric insertion channel that provides perfect fit to the nail structures of steel profiles. It incorporates an impact-absorbing air-channeled (dome) body at the top and dual-direction sealing fins above this dome that distribute ground pressure.Functional Role in the System:Steel System Protection and Impact Absorption: Positioned at the lowest point of heavy steel shutter systems, it dampens the harsh impact (metallic noise) when the steel base strikes the ground during closing.Advanced Dual-Fin Ground Sealing: The micro fins on the dome create an additional scraping barrier when in contact with the ground. Even on uneven and rough surfaces, they fill gaps and completely prevent water, dust, wind, mud, and pest ingress from below.High Load-Bearing Capacity: Withstands the vertical load pressure of heavy-tonnage steel shutter pallets without crushing or losing shape (with memory stability).Target Sector and Application Area:Steel spiral shutter manufacturers, heavy-duty industrial door producers, factory/warehouse hangar door installers, and manufacturers of high-security steel shutter systems.Raw Material and Tolerance Identity:PVC and TPE Extrusion: The asymmetric base section that inserts into the steel base profile nail is formulated at optimum hardness to prevent pullout from the channel under load. The upper sealing balloon section is manufactured using co-extrusion (Co-ex) technology that maintains flexibility and offers high recovery capability.Climatic and Thermal Stability (Temperature Values):CNR Seal - PVC Series: Operates at standard temperatures between -20°C and +60°C. It is the most economical and long-lasting base sealing solution for passages, shopping centers, or commercial steel shutter projects under standard climate conditions.CNR Seal - TPE Series: Provides superior thermal stability in the most demanding exterior and ground conditions between -40°C and +80°C. In winter when exposed to freezing snow, frost, and ice on the ground, it does not crack or break; in summer, it does not melt, stick, or lose shape on hot concrete or scorching asphalt surfaces.Packaging and Production Length:Standard Packaging: The standard packaging/wrapping quantity established by our factory for this model is 100 meters.Flexible Solution: To minimize waste ratios for manufacturers, reel or spool wrapping is performed at custom lengths as requested according to customer demand and order volume.Custom (Contract) Flexibilities:Color options in Black, Anthracite Gray, or Gray tailored to your steel shutter profile and ground concept.Custom length cutting capability that reduces on-site cutting and labor time for your project.

View Details
Automatic Shutter Bottom Track Weatherstrip
CNR-OKA-010201
100 MT

Automatic Shutter Bottom Track Weatherstrip

Geometric Design and Cross-Section Analysis:Base Width: 15 mm (Provides perfect fit to the wide T-slot channel in the base profile with no lateral sliding).Total Height: 18 mm (The circular dome structure provides high compression and damping capacity during ground contact).Channel and Geometry Structure: The product features a dual-leg T-base structure that locks tightly onto the base profile, with a hollow, wide air channel (balloon/dome) sealing geometry on the upper portion.Functional Role in the System:Ground Pressure and Damper Function: When the shutter is fully closed, the hollow balloon structure flexes to absorb the vertical pressure applied by the motor. It both relieves the motor load and prevents the metal base from striking the ground harshly, providing acoustic protection.Perfect Base Sealing: The flexible geometry fills gaps in curved, uneven, or improperly leveled floors. It completely prevents water, wind, dust, leaves, and pests from infiltrating the base line.Wear and Protection Barrier: Located at the lowest point of the heavy shutter slat assembly, it prevents direct contact between the aluminum base profile and the ground, eliminating deformation.Target Sector and Application Area:Automatic rolling shutter and blind manufacturers, industrial sectional door assemblers, factory and warehouse door fabricators.Raw Material and Tolerance Identity:PVC and TPE Extrusion: The lower T-base portion entering the aluminum base channel features optimal hardness for high strength and load-bearing capacity. The upper circular balloon portion that compresses against the ground possesses superior "memory" stability (permanent deformation resistance) for continuous compression and recovery cycles.Climate and Thermal Stability (Temperature Ratings):CNR Seal - PVC Series: -20°C to +60°C standard seasonal temperature range. The most economical and long-lasting base insulation solution for indoor spaces and standard climate commercial retail projects.CNR Seal - TPE Series: -40°C to +80°C superior thermal stability in the most demanding exterior and ground conditions. Does not crack or break when contacting freezing snow and ice in winter; does not melt, stick, or lose form on hot concrete or asphalt surfaces in summer.Packaging and Production Footage:Standard Winding: The standard packaging/winding quantity established by our factory for this base seal strip model is 100 meters.Flexible Solution: To minimize waste on large projects, custom footage winding on spools or bobbins is performed according to customer requirements and order volume.Custom (Bespoke) Flexibility:Black, Anthracite Gray, or Gray color options matched to your shutter profile and ground concept.Custom length cutting capability that eliminates cutting labor on assembly lines for your project.

View Details
Automatic Shutter Bottom Guide Seal
CNR-OKA-010204

Automatic Shutter Bottom Guide Seal

Geometric Design and Cross-Section Analysis:Base Width: 17.8 mm (Wide T-base structure that fits perfectly into the channels of large cross-section base profiles, preventing lateral shifting).Total Height: 54 mm (High cross-section design and wide-angled upper fins engineered for projects requiring extreme sealing performance).Channel and Geometry Structure: The product features a dual-legged reinforced T-base structure, a shock-absorbing circular air corridor (balloon) in the middle section, and dual flexible wings (flaps) geometry extending outward at a wide angle above this balloon.Functional Role in the System:Extreme Ground Sealing and Sweep Barrier: When the shutter closes completely, the large flexible wings (flaps) opening to both sides create a dual-sided sealing wall by pressing the full width against the ground. It prevents 100% penetration of heavy water accumulation, vertical winds, dust, leaves, and pests from the bottom.Excellent Shock Absorption and Cushioning: The circular air cavity in the middle section dampens motor pressure when the heavy shutter closes. It prevents hard contact of the steel or aluminum base striking the ground (metallic noise).High Unevenness Tolerance: Thanks to its 54 mm total height, it perfectly isolates deep ground gaps where terrain is severely uneven and standard seals cannot close properly.Target Sector and Application Area:Automatic rolling shutter and blind manufacturers using wide base profiles, industrial sectional door factories, factory, warehouse and hangar garage door installers.Raw Material and Tolerance Identity:PVC and TPE Extrusion: The lower T-base feet passing through the profile groove have optimum hardness to prevent displacement under load. The dual wings and balloon structure at the top are manufactured using co-extrusion (Co-ex) technology, allowing continuous compression and recovery to original form (with memory stability).Climatic and Thermal Stability (Temperature Values):CNR Seal - PVC Series: Operates within standard seasonal temperatures between -20°C and +60°C. It is a highly economical base sealing solution for commercial steel or aluminum shutter projects under standard outdoor conditions.CNR Seal - TPE Series: Provides superior thermal stability in the most severe external facade and ground conditions between -40°C and +80°C. In winter when exposed to freezing snow and ice on the ground, the large wings on both sides do not crack or break; in summer, it does not melt, stick, or lose form on hot concrete or asphalt surfaces.Packaging and Production Length:Standard Winding: For this large cross-section model, our factory's standard packaging/winding quantity is x meters.Flexible Solution: To minimize waste ratios on customer manufacturing lines, reel or spool winding is performed in custom lengths as requested according to customer demand and order volume.Customer-Specific (Custom) Flexibilities:Color options in Black, Anthracite Gray, or Gray providing visual continuity with shutter profile and ground concept.Custom length cutting option eliminating cutting labor at the installation site.

View Details
Automatic Shutter Bottom Base Gasket
CNR-OKA-010205
50 MT

Automatic Shutter Bottom Base Gasket

Geometric Design and Cross-Section Analysis:Base Width: 15 mm (Provides easy installation by fitting securely into standard T-slot bearings on lower base profiles).Total Height: 49 mm (Designed for water flow-directing projects thanks to the high body structure and asymmetric blade curved from the top).Channel and Geometry Structure: The product features a single-leg sturdy T-base structure, a shock-absorbing circular air corridor (balloon) in the middle section, and a single flexible sweeping blade (flag) geometry that extends with a wide curve in one direction from above this balloon.Functional Role in the System:Directional Water and Wind Sealing (Sweeping Barrier): When the shutter is completely closed, the large flexible upper blade inclined in one direction presses against the floor at a wide angle, allowing water to flow outward (be swept out) from the space. It prevents heavy water accumulation, vertical winds, and dust from seeping in from the bottom.Advanced Damping Effect: The circular air chamber (balloon structure) in the middle section flexibly counteracts the vertical pressure applied by the motor in heavy shutter systems. It dampens hard impacts of the metal base against the floor and provides acoustic protection.High Surface Irregularity Tolerance: Thanks to its total height of 49 mm, it perfectly isolates deep floor gaps that are uneven and cannot be sealed by standard small-section seals.Target Sector and Application Area:Automatic roller shutter and blind manufacturers, sectional door factories using wide-section lower bases, factory, warehouse, and hangar garage door installers.Raw Material and Tolerance Identity:PVC and TPE Extrusion: The lower T-base section that passes through the profile slot has optimal hardness so it will not become displaced or torn under weight. The curved blade and balloon structure in the upper section are manufactured using co-extrusion (Co-ex) technology that continuously compresses and returns to its original form with memory stability.Climatic and Thermal Stability (Temperature Values):CNR Seal - PVC Series: Operates at standard seasonal temperatures between -20°C and +60°C. It is a highly economical base sealing solution for commercial steel or aluminum shutter projects under standard outdoor conditions.CNR Seal - TPE Series: Provides superior thermal stability in the most severe exterior facade and ground conditions between -40°C and +80°C. In winter when the curved blade contacts freezing snow and ice, it does not crack or break; in summer, it does not melt, stick, or lose form on hot concrete or hot asphalt.Packaging and Production Length:Standard Wrapping: The standard packaging/wrapping quantity established by our factory for this model is 50 meters.Flexible Solution: To reduce waste ratio in manufacturers' assembly lines to zero, wrapping on spools or bobbins is performed in custom lengths as requested according to customer demand and order volume.Customer-Specific (Custom) Flexibilities:Black, Anthracite Gray, or Gray color options providing visual harmony with shutter profiles and floor concepts.Custom cutting capability eliminating cutting labor at the installation site tailored to your project.

View Details
Custom Request

Tailored Production and Solutions

Need custom dimensions, color or cross-section on our existing products? Planning a special profile for a different application? Our engineering team designs custom molds and recommends formulations based on your project — send us your request and let's build the right solution together.

Submit Custom Request

Precision Manufacturing

We manufacture to the tolerances demanded by your technical drawings, samples and application requirements — using PVC, TPE, TPV and other technical raw materials at high quality standards.

Turnkey From Design to Mold

From your technical drawing or sample, we plan and manage the entire flow — profile design, mold development, sample approval and serial production — from a single center.

Transparent Production Flow

From the first evaluation of your request through production and shipment, we track every stage on a planned schedule and provide timely updates at each step — delivering reliable project management.