Vertical Sliding Window Seals
CNR SEAL offers sealing profiles for vertical sliding glass and window systems. Designed for suitable sliding applications, these profiles help reduce vibration, cushion contact between components and support smooth system operation. Product selection depends on the system design, profile dimensions and material requirements. Our solutions are intended for window manufacturers and industrial customers.

Guillotine Channel Strip
Geometric Design and Cross-Section Analysis:Locking Tab (Root) Width: 7 mm (Locks precisely into the screw and mounting channels of aluminum guillotine glass system rail profiles).Total Profile Width / Cover Dimension: 20 mm (Width designed to aesthetically conceal open channels and connection gaps on the rail profile surfaces).Channel and Geometric Structure: The product features an H-type 7 mm standard mounting root mechanically seated in the aluminum channel at the bottom, and a flexible, crescent-shaped (bombe) 20 mm cover geometry at the top that completely encloses the profile from the outside. This circular configuration ensures a smooth, near-zero finish on the surface after installation.Functional Role in the System:Aesthetic Closure and Screw Concealment: Conceals mounting channel holes and unsightly screw visibility in the side support pillar profiles of guillotine glass systems. Creates a unified, modern, and smooth visual line on the aluminum surface.In-Channel Dust and Dirt Barrier: Protects the working channels of motorized vertical glass panels from the external environment. Prevents dust, pollen, leaves, and dirt from accumulating in profile gaps, extending the service life of the vertical movement mechanism.Acoustic Insulation and Vibration Damping: Dampens vibrations that may occur in the aluminum body during motor-driven glass panel movement or under heavy wind loads. Reduces air circulation within the profile, preventing whistling and rumbling noises from entering.Target Industry and Application Area:Motorized vertical guillotine glass system manufacturers, winter garden and pergola closure installation firms, architectural aluminum joinery factories, and bioclimatic system producers.Raw Material and Tolerance Specification:PVC and TPE Extrusion: The 7 mm bottom locking root passing into the aluminum channel is optimized in hardness for easy seating during installation and to prevent displacement over time. The 20 mm circular bombe cover section on the outer surface is manufactured using co-extrusion (Co-ex) technology, providing smooth surface quality, high wear resistance, and stable "memory" that maintains its form with continuous flexing.Climate and Thermal Stability (Temperature Values):CNR Seal- PVC Series: Operates within standard seasonal temperatures between -20°C and +60°C. An economical and long-lasting channel cover solution for standard guillotine projects used in interior and exterior closures.CNR Seal- TPE Series: Exhibits superior thermal stability in extreme climatic conditions between -40°C and +80°C. Shows no color fading, melting, sagging, or cracking on guillotine pillars directly exposed to sunlight; maintains its mechanical protection function in winter freezing conditions without hardening or breaking.Packaging and Production Length:Standard Packaging: The standard packaging/wrap quantity established by our factory for this guillotine channel insulation and cover model is 100 meters.Flexible Solution: To prevent material waste according to vertical pillar heights, custom reel or spool wrapping is performed in the desired length specifications according to customer requirements and profile dimensions.Customer-Specific (Custom) Flexibilities:Different color options that perfectly match the color of aluminum guillotine profiles and concept (Anthracite Grey, Black, White, Cream, etc.) to create visual unity.Custom length cutting capability for your project, eliminating cutting work on the installation site.
View Details
Guillotine Clamp Cord
Product Category: Seals, Guillotine Seals, Guillotine Locking SealsGeometric Design and Cross-Section Analysis:Top Head Width: 5 mm (Sits precisely on the sealing surface of horizontal locking and joint profiles in guillotine glass panels).Insertion Tab (Root) Width: 3 mm (Locks with tight-fitting logic into the narrow cross-section internal tab channels of aluminum locking profiles).Total Profile Height: 5 mm (Depth sufficient to flawlessly close the micro-isolation gap at the locking point where two moving glass panels overlap).Channel and Geometry Structure: The product features a 3 mm circular locking root (anchoring tab) at the bottom that provides mechanical retention to the profile, directly above it a flat head structure 5 mm wide that balances the supporting body, and an overall compact working height of 5 mm. It is designed with minimum tolerances to prevent gaps at glass joint lines.Functional Role in the System:Locking Point Air and Water Seal: Provides sealing along the horizontal joint where motorized vertically-moving guillotine glass panels lock together when in closed position. Absolutely prevents air infiltration and water leakage at locking joints during strong winds and heavy rain striking the facade.Acoustic Dampening and Whistle Elimination: Resists micro-vibrations that panels may experience due to wind, preventing aluminum profiles from striking each other. Cuts off whistling noise that wind can generate in narrow passage areas through its aerodynamic design.Dust and Dirt Barrier: Creates a complete isolation wall between interior and exterior environments, preventing dust, pollen and dirt from penetrating horizontal locking gaps.Target Sector and Application Area:Motorized vertically-moving guillotine glass system manufacturers, winter garden and pergola enclosure installation companies, architectural aluminum joinery factories, and heated guillotine system producers.Raw Material and Tolerance Identity:PVC and TPE Extrusion: The 3 mm lower locking root anchored into the aluminum locking channel has optimum hardness to prevent glass panels from slipping during continuous up-and-down movement. The 5 mm upper head section that continuously presses on and rubs against the opposite panel surface is manufactured using flexible co-extrusion (Co-ex) technology with high abrasion resistance, shape recovery capability after compression, and excellent "memory" stability.Climate and Thermal Stability (Temperature Values):CNR Seal- PVC Series: Operates within standard seasonal temperatures between -20°C and +60°C. A highly economical and long-lasting locking seal solution for standard guillotine projects requiring interior comfort and basic insulation.CNR Seal- TPE Series: Demonstrates superior thermal stability under the most extreme climate conditions between -40°C and +80°C. Does not melt, stick, dry out or loosen when locking profiles directly adjacent to glass panels are excessively heated by direct sunlight and greenhouse effect; maintains flexibility during harsh winter snow loads and freezing conditions, preventing glass movement restriction.Packaging and Production Meter:Standard Packaging: The standard packaging/wrapping quantity established by our factory for this guillotine locking and isolation model is 250 meters.Flexible Solution: To prevent material waste by manufacturers and installation teams based on horizontal panel widths, custom metering on spools or bobbins is performed according to customer requirements and profile lengths.Custom (Made-to-Order) Flexibility:Various color options that achieve complete visual harmony with the color of aluminum locking profiles and design concept (Anthracite Gray RAL 7016, Black, White, Cream, etc.).Custom length cutting capability for your project, eliminating cutting work at the installation site.
View DetailsTailored Production and Solutions
Need custom dimensions, color or cross-section on our existing products? Planning a special profile for a different application? Our engineering team designs custom molds and recommends formulations based on your project — send us your request and let's build the right solution together.
Precision Manufacturing
We manufacture to the tolerances demanded by your technical drawings, samples and application requirements — using PVC, TPE, TPV and other technical raw materials at high quality standards.
Turnkey From Design to Mold
From your technical drawing or sample, we plan and manage the entire flow — profile design, mold development, sample approval and serial production — from a single center.
Transparent Production Flow
From the first evaluation of your request through production and shipment, we track every stage on a planned schedule and provide timely updates at each step — delivering reliable project management.
