CNR-FC-090101

Glass Gasket

Contact

Description

Geometric Design and Cross-Section Analysis:

  • Total Base Width: 14 mm (Fits precisely into the wide insulation channels of aluminum facade, window or glass balcony frame profiles).

  • Total Profile Height: 10.45 mm (Possesses sufficient depth to seal mechanical clearances and working tolerances between glass and profile perimeter without error).

  • Upper Bulb Width: 6 mm (A smooth upper sealing area that stretches under pressure and wraps around the glass surface).

  • Channel and Geometric Structure: The product features a 14 mm flat fixing base that sits perfectly balanced in the profile channel at the bottom, a flexible circular air chamber (bulb structure) at the center, and dual-sided micro-claw (fin) geometry on the outer side surfaces of this bulb that enhances the insulation grade. Provides maximum damping under pressure.

Functional Role in the System:

  • High Glass Edge Sealing and Insulation: Functions along the joint line where glass panes meet the frame in aluminum joinery, guillotine glass or glass balcony systems. The flexible bulb structure at its center and side claws definitively prevent water and air ingress during heavy rain and wind impacts on the facade.

  • Acoustic Damping and Vibration Damper: Counteracts micro-oscillations that glass surfaces may undergo due to wind loads or mechanical movement. Prevents resonance formation in the aluminum body and completely eliminates whistling and rumbling noises that may originate from profile cavities through its acoustic chamber.

  • Air, Dust and Pollen Barrier: When the system is in closed position, it fully protects interior climate comfort. Creates an impenetrable line that prevents dust, pollen, polluted air and debris from the external environment from seeping in through the glass joint points.

Target Sector and Application Field:

Aluminum joinery and window manufacturers, glass balcony and guillotine glass system producers, winter garden assembly firms, facade insulation and architectural aluminum manufacturing plants.

Raw Material and Tolerance Identity:

  • Co-Extrusion Technology: The 14 mm lower base section that sits in the aluminum channel possesses optimum hardness to prevent the seal from slipping or folding from the groove under vertical and horizontal loads applied by the glass. The flexible upper bulbed body section, which is continuously subjected to glass pressure, compression and external environmental conditions, is manufactured using high-wear-resistant flexible co-extrusion (Co-ex) technology with "memory" stability that does not lose its original form after compression.

Climatic and Thermal Stability (Temperature Values):

  • CNR Seal- PVC Series: Operates within standard seasonal temperatures between -20°C and +60°C. Represents a highly economical and long-lasting insulation solution for residential and commercial glazing projects.

  • CNR Seal- TPE Series: Demonstrates superior thermal stability in the most extreme climate conditions between -40°C and +80°C. Does not melt, dry out, crack or stick to glass at glass edges that receive direct sunlight in summer and overheat due to greenhouse effect; prevents breakage in winter by maintaining elasticity under freezing snow loads.

Packaging and Production Footage:

  • Standard Packaging: The standard packaging/winding quantity established by our factory for this bulbed glass protection and insulation model is supplied as a single spool in x meters.

  • Flexible Solution: To prevent waste for assembly teams and manufacturers according to joinery dimensions, custom footage spools or spool winding is performed according to customer requirements and profile lengths.

  • Customer-Specific (Bespoke) Flexibilities:

  • Various color options that match aluminum joinery colors (Anthracite Grey RAL 7016, Black, White, Cream, etc.) to achieve visual harmony.

  • Custom size cutting capability for your project, eliminating cutting labor at the installation site.

Similar Products

Window Glazing Gasket
CNR-FC-090102

Window Glazing Gasket

Geometric Design and Cross-Section Analysis: Insertion Lug (Root) Width: 4.5 mm (Mechanically locks precisely to the narrow cross-section internal lug slots of aluminum facade, window, or glass balcony profiles). Channel and Geometry Structure: The product features an H-type 4.5 mm reinforced locking root with a circular mounting cavity at its center for secure seating against the profile base, a completely flat horizontal pressure flange at the top, and a flexible asymmetric angled wiper blade (flag) geometry extending upward at a specific angle at the left end point. Functional Role in the System: · Angled Sweeping and Sealing Line: Operates on the vertical line where the glass panel intersects with the profile edge in sliding glass balconies, guillotine windows, or movable aluminum architectural systems. The angled flexible blade at the left end maintains continuous light contact with the moving glass surface, sweeping water spray outward and providing weathertightness. · Wind Barrier and Acoustic Insulation: Completely blocks vertical wind passages that may form in profile cavities when the system is closed. Blocks air currents that could penetrate between aluminum and glass in severe storms, causing resonance, and suppresses whistling and humming noises through its acoustic structure. · Dust and Dirt Barrier: Prevents dust, leaves, pollen, and dirt from external sources from entering the movement channels of glass panels. Preserves interior climate stability while keeping moving components clean, extending the service life of the system mechanism. Target Sector and Application Field: Aluminum joinery and window manufacturers, sliding and folding glass balcony system producers, vertical motorized guillotine glass installation companies, winter garden and architectural aluminum facade manufacturers. Raw Material and Tolerance Identity: Co-Ex Extrusion Technology: The 4.5 mm lower locking root and horizontal pressure bridge passing into the profile channel are optimally hardened to prevent ejection from the slot during vibrations and shocks caused by glass movement. The asymmetric angled end blade section, continuously subjected to glass friction, bending, and flexing, is manufactured using high-wear-resistant co-extrusion (Co-ex) technology with "memory" stability that quickly returns to its original form when pressure is released. Climatic and Thermal Stability (Temperature Values): CNR Seal - PVC Series: Operates in standard seasonal temperatures between -20°C and +60°C. A highly economical and long-lasting weathersealing solution for interior closures and standard insulation glazing projects. CNR Seal - TPE Series: Demonstrates superior thermal stability in extreme climate conditions between -40°C and +80°C. Does not melt, sag, or stick to glass when exposed to direct sunlight in summer causing excessive heating of glass and aluminum surfaces; maintains complete wiper performance without hardening under freezing snow loads in winter. Packaging and Production Footage: Standard Wrapping: The standard packaging/wrapping quantity established by our factory for this angled wiper glass protection and insulation model is x meters on a single reel. Flexible Solution: To prevent material waste on manufacturing and assembly lines, custom footage reeling or spooling is performed according to customer requirements and facade profile lengths. Customer-Specific (Custom) Flexibilities: Different color options that achieve complete visual harmony by matching the design color of aluminum joinery systems (Anthracite Gray RAL 7016, Black, White, Cream, etc.). Custom cutting capability tailored to your project, eliminating on-site cutting and adjustment labor.

View Details
Window Sash Cord
CNR-FC-090103
100 MT

Window Sash Cord

CNR SEAL Glass Wedge Gasket – CNR-FC-090103-1485The CNR SEAL Glass Wedge gasket is designed for use in glass and profile assemblies, assisting in supporting the glass within the profile and providing a secure seating at the connection point during proper installation applications. The special profile geometry is designed for use in glass and metal profile systems.Technical SpecificationsProduct name: Glass Wedge GasketProduct code: CNR-FC-090103-1485Profile height (A): 14 mmBase width (B): 8.5 mmProfile type: Special section glass positioning and sealing profileApplication area: Suitable glass and profile assembliesInstallation compatibility: Depends on the dimensions and design of the profile channel being used.For correct product selection, it is recommended to verify the glass thickness, profile channel dimensions, and installation conditions. Material type and sealing performance should be evaluated according to the product's technical specifications.

View Details
Custom Request

Tailored Production and Solutions

Need custom dimensions, color or cross-section on our existing products? Planning a special profile for a different application? Our engineering team designs custom molds and recommends formulations based on your project — send us your request and let's build the right solution together.

Submit Custom Request

Precision Manufacturing

We manufacture to the tolerances demanded by your technical drawings, samples and application requirements — using PVC, TPE, TPV and other technical raw materials at high quality standards.

Turnkey From Design to Mold

From your technical drawing or sample, we plan and manage the entire flow — profile design, mold development, sample approval and serial production — from a single center.

Transparent Production Flow

From the first evaluation of your request through production and shipment, we track every stage on a planned schedule and provide timely updates at each step — delivering reliable project management.